|
|
Post by optimised yammy on Feb 21, 2013 18:45:20 GMT
Easy  only couple of hours  was gunna do that vid for U today but its been raining and its cold so I wouldn't be able to show off road |
|
|
|
Post by optimised yammy on Feb 22, 2013 21:02:47 GMT
man I need to find some white headlights know any good ones?
|
|
|
|
Post by MRB3N on Feb 22, 2013 21:18:58 GMT
man I need to find some white headlights know any good ones? Yeah 99 pence Xenon Brilliant White (or Blue) ones.  |
|
|
|
Post by optimised yammy on Feb 22, 2013 22:48:06 GMT
Is tht for both lights yh? So I dont need to get different ones?
|
|
|
|
Post by MRB3N on Feb 23, 2013 9:16:20 GMT
Is tht for both lights yh? So I dont need to get different ones? Both lights are same bulb mate yes. |
|
|
|
Post by optimised yammy on Feb 23, 2013 9:34:50 GMT
I knew tht im not used to lights lol used to motocross and track bikes with no lights haha |
|
|
|
Post by Shawty46 on Jun 26, 2013 16:18:43 GMT
how does this work? wont one bulb be shining higher than the other? since there not two filament bulbs?
|
|
|
|
Post by shamzr125 on Jun 26, 2013 18:17:46 GMT
how does this work? wont one bulb be shining higher than the other? since there not two filament bulbs? Just put in two of the same bulbs in? |
|
|
|
Post by Shawty46 on Jun 26, 2013 20:03:49 GMT
you took a photo yet? of your new bulbs?
|
|
|
|
Post by shamzr125 on Jun 26, 2013 23:08:43 GMT
you took a photo yet? of your new bulbs? Check my blog mate just uploaded pics of my lights let me know what you think |
|
|
|
Post by MRB3N on Jun 27, 2013 13:17:42 GMT
how does this work? wont one bulb be shining higher than the other? since there not two filament bulbs? Yes. One is High Beam and one is Dipped Beam.. But the mod of dual lights is only on High Beam.When you are riding on Dipped Beam, you still have Dipped Beam only. But when you switch to High Beam, you have BOTH lights. As stock, when you flick to High Beam, you only have one light and its barely better than the single Dipped Beam. With the mod, you are bridging the gap. So when you flick to High Beam, the power to Dipped Beam doesn't get cut. That way you have both lights on and can see a lot MORE!R6's are actually setup like this as standard. So you can also do what Irish Al has done and fit the R6 switch unit. You will even have a hazard lights switch then too. But they aren't cheap.  |
|
|
|
Post by TheRoseyBiker on Jul 29, 2013 23:00:40 GMT
|
|
|
|
Post by optimised yammy on Jul 30, 2013 0:35:20 GMT
|
|
|
|
Post by TheRoseyBiker on Jul 30, 2013 20:56:31 GMT
I'll get you one tomorrow pal, bikes away and I'm in bed:L |
|
|
|
Post by optimised yammy on Jul 30, 2013 23:25:00 GMT
I'll get you one tomorrow pal, bikes away and I'm in bed:L Fair enough |
|
only couple of hours 
was gunna do that vid for U today but its been raining and its cold so I wouldn't be able to show off road
